Bradley EXPRESS SS-3/AST/STD Manual de instalación descargar pdf (Pagina 5)

Express® Lavatory System SS-Series

Installation - Obsolete SS-3/AST/WH97TAS

Bradley Corporation • 215-1240 Rev. E; EN 08-805 4/24/08

Installation Instructions

Step 1: Rough in

Note: See Figure 1a (below) and Figures 1b and 2 (on page 6) when roughing in the Express®.

IMPORTANT: Flush the supply lines before making connections. Debris in supply

lines will cause the valves to malfunction.

IMPORTANT: Dimensions shown in Figure 1a are for Juvenile Height grades Pre-K

thru 5 or 6, and in Figure 1b for Juvenile Height grades 6 thru 8 or 9.

1. Rough in 1/2" NPT hot and cold supply lines through wall at dimensions shown.

2. Rough in 1-1/2" NPT drain waste connection through wall at dimensions shown.

3. Install (10) 3/8" wall anchors with a minimum pull-out rating of 1,000 lbs. (supplied by

installer) at the locations shown in Figures 1a and 1b.

NOTE: The anchors will be used to mount the Express® bowl and frame to the wall.

Figure 1a

Installation Instructions continue . . .

SS-3/AST/WH97 Express® Lavatory System Dimensions

Juvenile Height Mounting (Grades Pre-K thru 5 or 6)

1 2 3 4 5 6 7 8 9 10 ... 18 19

Sin comentarios

Bradley EXPRESS SS-3/AST/STD Manual de instalación Pagina 5